Here at The Kilburn Garage along side MOT’s, Servicing etc, we carry out all custom work, including, Engine Conversions, Welding and all Fabrication. If you have a project that needs a quote please give James or Andy a call today on Derby 882727

Renault Kangoo Welding
Maserati GT Engine & Gear Box Swap

This Maserati GT was brought in to us from another local dealership as they didn’t want to take the beast on! Carrying out complete engine and gear box swap, the 4.7 litre V8 had severe engine wear causing it to knock and lose power. With the Maserati engine and gear box out, it was time to swap all auxiliaries and wiring loom onto the replacement engine which the customer had supplied. This was not job completed, as once the replacement engine was fitted and ran up, it was soon obvious there was an issue as the oil and water were mixing. After further investigation it was found that the heat exchanger gasket had failed. To get to this involved stripping the top of the replacement engine to replace the gasket. The engine is now up and running and the beast is back on the road. No Job is to big for our guys here!

Mustang Welding

This Ford Mustang was brought and imported from America. The customer bought it to us for an inspection and MOT. On inspection it was found that the floors had been replaced but only tac welded in and also other areas of corrosion were found. We also found that the rear shock absorber mounts had been modified to take an up-rated shock but they had only used a thin gauge mental, which would have bent. This was replaced with a larger gauge steel plate, all floors were seam welded, and new metal put in where required.

MK 1 Golf Engine Conversion